Brother SA109 1/4 Inch Binding Foot
- Attach bias tape less than 7mm (finished) in width
- Works with straight; zig zag stitches or decorative stitches
- Create and attach customized bias binding tape
- Genuine Brother Made Accessory
- For all Brother machines
Bias binder foot for creating and attaching bias trim
List Price: $ 19.99
Price: $ 15.97
Where has this been all my life?,
I love this binding foot! It fits my Brother machine perfectly and does an amazing job. The binding is neat and complete in just a couple of easy steps. Plus, I’ve noticed that it’s much more secure than the binding I have to finish sewing on. My kids’ quilts get a lot of wear and tear (washing, playing, sleeping, tent-making), so they need to withstand some abuse. The foot perfectly places the binding so that it stitches clearly through to the other side and doesn’t miss catching the binding. Very nice.
Was this review helpful to you?
|Brother SA109 vs. Distinctive Binding Foot,
Since I own and have used both products, I’ll review both the Brother SA109 Binding Foot and the Distinctive Tape Binding Foot at the same time. This will essentially be a comparison of the two.
Both products are about the same price, at the present time there is about a $2 difference, giving a slight edge to Distinctive. Both can be used on most low-shank sewing machines that accept this type of snap-on foot.
The construction between the two brands is quite different. The Brother is made completely of metal while the Distinctive is a combination of metal and plastic. Therein lies the biggest difference between the two. The Brother has no adjustment so is limited to a maximum finished size of 1/4″ (7mm) while the Distinctive can be adjusted from about 3/8″ to 3/4″ (5 to 20mm) finished size. Advantage: Distinctive
The construction design also has an effect on ease of use. The Distinctive Foot has 2 grooves in the plastic. You place your folded bias tape edges into the groves, adjust for width, snap the foot onto the machine and slide the fabric between the two edges of the binding tape. The Brother design is more like a narrowing funnel. Push the bias tape through the opening until it appears on the other side, snap the foot on the machine, and slide in the fabric. You can, of course, perform the above with either foot on the machine, but I’ve often found it easier to attach the foot after I’ve put the binding tape in. With the design difference I’ve found the Brother foot easier to use. Keeping the bias tape and the fabric correctly aligned was easier and I was able to sew a little faster. If I didn’t keep the bias tape and the fabric aligned exactly right when using the Distinctive foot, I had the bias tape come out of the groove. If I was lucky I caught it right away, if not, I would have to remove the stitches and re-do a small section. I think it may be especially problematic if you cut your own binding strips and they aren’t pefectly straight. Advantage: Brother.
In conclusion, I’m a guy who has taken up quilting as a retirement hobby. I have arthritis and my hands shake a bit so I look for anything that will make things easier for me. I use a Brother CS6000i which both feet have been used with. I’m happy I own both the Brother SA109 and the Distinctive Tape Binding Presser Foot, they both work for me in slightly different ways. The Brother is easier to use while the Distinctive is more versatile. Neither is perfect, but for me, they are a much better solution than applying bias tape by hand or trying to perfectly fold, iron then sew binding strips into place with a regular presser foot. For that, they each get 4 stars.
Was this review helpful to you?
|