The power cord on my vacuum cleaner has came partly unattached from the vacuum,problem is I cannot get the back of my Vacuum off so my husband can re wire it anyone know how to go about doing this.Also before you ask yes my husband knows what he is doing.Thanks!
Yes there are screws but some I cannot get to,due to the fact that they are so far down in there.,
Comments are closed.
there should be screws or clips somewhere.
I have repaired many and never come across one yet that I could not get apart.
but have not tried a Nano Lite yet.
good luck
I am sure you will get it.
and good for you for being a person who can "do things"
the vast majority have lost this skill
I looked up the manual
http://www.hoover.com/pdfs/manuals/U2440900.pdf
on page 10 it shows how to replace the belt
that will get you to the motor and the switch where you can connect a new power cord
there are 6 screws
2 at the front of the bottom plate
2 at the rear of the hood
2 under the hood on the agitator cover
when it is apart you should clean the beater bar and check the belt.