need help to clarify doubt about: : How do you make a simple vacuum out of two hoses and running water?
I am doing a worksheet and I have to do this problem. The problem says: Use Bernoulli’s principle to explain how you can create a simple vacuum using two hoses and some running water. HELP!!!!!!!
Try this:
Answer by tipster
MAKE A TEE HOOK IT TO FAUCETHOOK SIDE INLET INTO TEE COMING FROM WATER IN A BUCKET BOTTOM OF TEE ON FAUCET WHEN YOU TURN ON WATER PULLS WATER OUT OF BUCKET!!!!
Add your own answer in the comments!
We have to assume here that you know what Bernoulli’s principle is??? It says that when water or air passes an opening in a fairly quick manner, it creates a vacuum in a hose connected to the opening. Once you have a tee, in a size which will fit into the hose you’re using for the project, which you will have to acquire, probably from a hardware store, you’ll need to connect one hose to the middle opening of the tee. That goes into the bucket. If you connect a garden hose from the outside faucet or any faucet to the faucet that you connect to either of the two remaining openings, when you turn on the water what do you think will happen. The water rushing past the center opening will pull water up from the pail and push it out the other opening. And there’s your vacuum.
‘